An AES key is the secret that locks and unlocks the readings a Wireless MBus meter sends. The meter encrypts each telegram with the key before it transmits, and the receiver needs the same key to turn it back into readings. Wireless MBus uses AES with a 128 bit key.
Why it matters
Radio telegrams can be heard by anyone in range. Encryption stops other people reading or altering the data, so utilities can trust the readings used for billing and monitoring.
What happens if the key is missing or wrong
- The receiver still hears the meter, so it shows a meter ID and a signal strength.
- The readings are unreadable or rejected, so nothing arrives on the platform.
- This is one of the most common reasons a Wireless MBus meter is heard but not read.
Where the key comes from and how to keep it safe
- The key is set by the meter manufacturer, either one key per meter or one per batch, and should be recorded when the meters are commissioned.
- Enter the key into the receiver or gateway for each meter, or for each batch.
- Store keys securely. A lost key means the meter cannot be read over the air.
Caution: Never send a meter key by plain email or put it on a public page. Treat it like a password.
Where to go next
- For the security modes OMS defines, read the Security and encryption section of Understanding Wireless MBus for Smart Metering.
- If a meter is heard but not read, follow the steps in Wireless MBus Overview and Diagnosis.