Standard temperature sensors can be converted to direct sensors with the direct sensor M10 adapter available from Sycous.
The two plastic half-shells are placed around the temperature sensor. These create an M10 thread on the exterior and this allows the temperature sensor to be installed within a ball valve with a drilled M10 hole.
Features
- M10 Thread
- Suitable for 5.0/5.2mm diameter temperature sensors
- Heat resistant plastic, suitable for heat & cooling meters
Product Variants
| Part Code | Name |
|---|---|
| ZE010PL | M10 Blanking Plug |
| ZE001MA | M10 Adaptor |
| ZE011PL | M10 Brass Blanking Plug without copper seal |