The software at a glance
Meter Reader Lite turns an Android device into a wireless MBus reader. Meters are read over a Bluetooth connection, and in the larger licence variants the data is sent to a web application where meter lists and keys are managed.
Licence variants
| Variant | What it does | Configuration | Notes |
|---|---|---|---|
| S | Receives wireless MBus water, heat and cooling meters and PDC pulse modules in range. Free readout without a route function. | No | Stores data on a backend server only for Zenner devices with a Zenner factory key. |
| M | Everything in S, plus it receives OMS compliant wireless MBus devices. | Yes, for ZR devices | Stores only Zenner device data, and only for devices with a Zenner factory key. |
| L | Receives Zenner wireless MBus devices in range. Mobile software and web application. | Yes | Up to 2000 meters, plus 200 tolerance, on one Android device. Archiving, CSV import and export of meter lists and AES key import. Meter lists cannot be divided. |
| L plus | Same as L, for several Android devices. | Yes | Meter lists can be divided between devices. Licences extend in steps of 2000 meters. Each extra handheld needs an M licence. |
The voice function is included in all variants. In the L variants, status messages and previous monthly values are shown on the web portal.
Requirements
- Android 11 or higher
- Bluetooth with Serial Port Profile support
- An internet connection, by mobile data or WLAN, for data transfer in the L variants
- An ARM processor. The software does not work on devices with an Intel processor.
- Zenner does not guarantee operation on every device
Sycous part codes
There is no Sycous part code for this software.