Applications
Heat Metering
Measures the heat used in district heating and heating systems where water is the energy carrying medium, from a single flat to a whole building or site. The calculator works with ULTRAFLOW flow sensors for the flow range of the installation.
Cooling and Combined Heat and Cooling
The same calculator can measure cooling, or switch between heat and cooling in one meter, so a single device can bill both uses.
Leak and Burst Detection
With two flow sensors the meter compares flow in and out of the system and flags burst and leakage. It also flags air in the flow sensor, wrong flow direction and flow above qs for more than an hour. See Information Codes.
Remote Meter Reading
Two slots take communication modules such as wired MBus, wireless MBus 868 MHz, NB-IoT, 2G or 4G, LoRaWAN, Modbus, BACnet, LON, pulse and analog outputs, so readings reach a Sycous data collection system and Mabdeck. See the Communication Modules section: CMi4140 LoRaWAN Module, NB-IoT Module, Wired MBus Module and Wireless MBus Module.
Data Logging and Billing
The programmable data logger stores any register at intervals from one minute to one year, and a target date function supports billing periods.