Liberty Connect 200 Credit and PAYG Unit 3 articles

Liberty Connect 200 (LC200) is a smart interface unit that brings multiple utility meters together in one place. It collects and processes data from third party heat, cooling, hot water and potable water meters over MBus, and it can connect up to three different utility types at once. A built in communications hub connects the unit to the head end system over NB IoT or CAT M1 for remote data transfer, either on request or on a schedule. A Bluetooth Low Energy (BLE) home area network connects the unit to in home devices such as the Pipit 200 In Home Display (IHD). An internal relay allows the supply to be disconnected and reconnected, controlled by the unit’s business logic or remotely over the WAN or HAN. The unit also has sensors that detect external magnetic fields, so abnormal conditions can be logged and reported. Liberty Connect 200 supports both credit and Pay As You Go (PAYG) modes of operation.

Secure Pipit 200 In Home Display 3 articles

Pipit 200 is the colour touchscreen in home display for Liberty Connect 200 heat networks. This section provides the introduction, product overview, user guide and part code for the Pipit 200.

Liberty Connect 100 Credit and PAYG Unit 4 articles

Engineered to benefit both the consumer and the heat network operator, Liberty Connect provides usage information for community heating, and payment options for any size of district or community scheme. Liberty Connect 100 acts as a hub within the home, providing two-way communications with the heat service provider, including tamper detection. Consumers benefit from a portable multi-function in-home display, Pipit 500, allowing them to monitor and control their energy consumption and costs.

Secure Pipit 500 In Home Display 2 articles

Pipit 500 is a range of in-home displays that are developed to meet the growing global smart metering requirements. This sections provides a comprehensive set of articles for the Pipit 500, it's use cases and installation.

Liberty 100 Electricity Credit and PAYG Unit 3 articles

Liberty 100 is a single-phase smart electricity meter to meet the growing smart metering requirements. It has a modular architecture for both WAN and HAN. This enables multiple communications options to be deployed. The modules can be replaced in the field, which means that investment in the meter is protected even if the communication technology needs to be changed during the meter life. There is a pre-installed communication module. This acts as a hub for communication between the head end system and to the gas meter/in home display. Both the meter and communications hub are capable of remote firmware upgrade after installation. This allows or the changing of both features and functionality. Liberty 100 supports both credit and Pay As You Go (PAYG) modes of operation.

Guru Hub II 3 articles

The Guru Hub 2 manages and monitors up to five utility accounts, and controls up to three external control devices, such as shut off valves. The open API supports a range metering and billing services, giving you the freedom to swap to more competitive service providers without changing your infrastructure or disturbing customers.

ThermaReach-240 LoRaWAN Relay 3 articles

A LoRaWAN controlled 240 volt relay in an IP67 enclosure, used to switch heating actuators, pumps and similar loads on and off remotely.

ThermaReach-VFR LoRaWAN Volt Free Relay 3 articles

A LoRaWAN controlled volt free relay in an IP67 enclosure, used to control heating valves, boiler signals and other isolated switching.

Sycous Orbit PAYG Platform 3 articles

Orbit is a cloud based, hardware agnostic PAYG and credit billing system for communal and district heating networks.

ZENNER In Home Display for Wireless MBus 2 articles

This section provides a breakdown of articles for the ZENNER In Home Display unit that is used to connect Wireless MBus meters to its interface for wireless remote reading and monitoring. You can find part codes, guides of installation and commissioning in this section.